NEEWER LT32 62" Carbon Fiber Travel Tripod

Name: NEEWER LT32 62" Carbon Fiber Travel Tripod
Rating: 4.8 (8 reviews)

From $239.99

Combo

LT32 LT32+Leveling Base

Product variants

Warranty

All NEEWER products include a 1-year warranty. Order on the official website and subscribe to our emails for an extra 1-year extension. Learn more at Warranty Policy.

Shipping Policy

Shipping from local warehouse based on your area, normally it takes 2~10 days for the delivery, Learn more at Shipping Policy.

Firmware & Manual

To download the product firmware or manual, please visit our Download Center.

Information

Due to the impact of tariffs and logistics costs, prices vary by location.

⚠️WARNING:This product can expose you to chemicals including [Lead and Phthalates], which
is [are] known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov.

Pick Option

Product overviews of the NEEWER LT32 Carbon Fiber Travel Tripod

Description

100% Carbon Fiber Compact Travel Tripod- The LT32 (formerly TP62) from NEEWER LITETRIP Series portable tripods, is a super light 2.6lb/1.18kg carbon fiber camera tripod with a 1"/26mm tube for stability and a 22lb/10kg load capacity (10lb/4.5kg with ball head). When folded, it's just 17"x2.6"/43x6.5cm, fitting easily in the carry bag. It also has a hook for counterweights on the center axis, ideal for outdoor shooting like landscape, nature, wildlife, and architecture photographyc
Detachable Versatile Quick Leveling Ball Head- The 360° panoramic ball head base (⌀30mm) allows a +/-15° quick leveling and dual U slots for 90° tilt, easily lockable with a flip buckle. It includes a 1/4" to 3/8" screw adapter and a tripod camera mounting base adapter that can be attached to the center axis, allowing for interchangeable use with other tripod heads. A bubble level lets you keep the camera straight
Quick Lock Arca Type Square QR Plate- The Arca type quick release plate is also compatible with the Peak Design PD Capture clip V3. A side button enables one push quick switch between the tripod and various camera mount clamp bases, while a safety lock prevents accidental contact with the button.Note: QR clamp compatible only with PD QR plates and included Arca type plates
Quick Release Height via Spring Flip Buckles- Spring loaded metal buckles swiftly pop up and unlock with a half open motion, enabling rapid and stable height adjustment, while the extended wing design ensures secure and pinch free flipping. The 4 section legs are adjustable from 16"-62"/41-157cm and with three fixed opening angles: 22°/55°/70°. The center column can be reversed for macro photography at a height of 7.5"/19cm
Functional Expansion and Spikes- The 1/4" mounting screw on the QR plate is suitable for DSLRs, camcorders, action camera mounts, and phone holders. Two 1/4" threads on the tripod spider can connect magic arms, ball head adapters, and other accessories for professional creation. Nonslip foot pads are removable for installing spikes, which allow the tripod to stabilize on sandy, rocky, and muddy terrains

Specifications

Model: LT32
Material: Carbon fiber
Load Capacity (Tripod): 22lb/10kg
Load Capacity (Head): 10lb/4.5kg
Angle Selector: 3
Folded Size: 17"x2.6"/43x6.5cm
Maximum Tube Diameter: 1"/25mm
Height Range (Without Center Column): 7.5"-52"/19-133cm
Height Range (With Center Column): 16.1"-61.8"/41-157cm
Weight: 2.6lb/1.18kg

Package Contents

1 x Tripod
1 x Carry Bag
1 x Tripod Camera Mounting Base Adapter
1 x 1/4" to 3/8" Screw Adapter
1 x L Shaped Hex Key
3 x Foot Spike
1 x Shoulder Strap for Bag

NEEWER LT32 62" Carbon Fiber Travel Tripod

Reviews

4.8

8 reviews

Click to review

Recent

03/21/2025

Ray

Light and portable but I would recommend using a long telephoto lens like a 200-600 lens which I tried using. If you do, dont try to increase its size since . Hold it since on windy days the camera will shake causing blurry photos. I’m not one to return items so I’ll just use this for smaller lenses.

02/11/2025

P Lam

This tripod is light weight yet rock solid. Paired with their GM26 head (compact pan-tilt), it is my ideal basic travel photo companion.The included leveling head with quick-release QR on-off feature is great convenience. Very positive in how it works. For me, the added weight is not worthwhile for my travel needs. Will save it for another less weight-sensitive setup.

01/04/2025

Justus J.

There is a lot to like about the tripod: it is light and sturdy, easy to set up and use. But there are aspects that made me doubt that I'd be happy in the long run.I have been looking for a carbon fiber travel tripod for a long time. I am used to heavy gear for studio work, and I certainly did not expect rock solid performance, just enough to hold and keep my camera stable and straight. I was pleasantly surprised by its solidity and how well it handled the weight of my camera.So, I took the tripod on a trip to Chicago for some long exposures of the L. At home, and right out of the box, all was fine. The camera (Sony a7IV with a Sigma 24-70/2.8 II) sits well on the tripod. The image you see here was taken in a different environment. Cold winds were blowing, cooling down all metal parts quickly. The button that releases the plate got quite stiff, which made operating the head difficult. When moving around and changing locations, I had a hard time clicking the camera with the plate into the tripod. It was very fiddly. When I turned the camera into portrait position, it started sliding, requiring tightening of the fiddly little screw with numb fingers. I have not come across that issue with my other tripods, and it might just have been that specific situation. I am aware that I could replace the ball head and/or the plate, but if a tripod has one, it should function well.Overall, I'd say that the tripod works very well in 90% of all situations. I might have been outside of that range, affecting my sense of how reliable the tripod works.

10/23/2024

Rae

I took this tripod on my solo trip to Hawaii earlier this year, as I didn't have any else to hold my camera for me. This tripod was light and small enough to put inside my small sports bag, and the material was sturdy. I was confident in placing this on any terrain: it rained a lot when I was in Hawaii, and there was no problem placing this on muddy, slippery, or rocky ground.There were also many days with extremely strong winds. Thankfully, there's a little hook in between the three legs, so I was able to fill up my sports bag with random rocks on the ground, attach it to the hook, and serve as a counterweight to the wind trying to tip over my tripod and expensive camera!Overall, this tripod was worth the money I spent on it, as it helped me take amazing pictures and wasn't too heavy to carry around all day.

08/13/2024

Kirk Kennedy Creative Photography

This item works very well and is light and durable. I contains everything a traveling photographer needs for most types of shooting. Real Estate estate interiors, landscapes, and product photography. It's convenient durable and simple to use.

1/5

07/28/2024

Jeremy Miller

Over the years, I have gone down many a tripod rabbit holes seeking out the best in class on a budget. All things considered, the Neewer LT32 met all my criteria for what my current needs are for landscape and astrophotography. Lightweight, carbon fiber, sturdy legs that have been tested in some light to moderate winds, as well as some real nice ergonomic and design features that separate this tripod from others in the same category. The main two competitors being the Peak Design travel tripod and the Ulanzi x Coman F38/Zero Y tripod are each similar in design and have their own pros/cons. Honestly, I typically buy Peak design for everything, but the price difference was just too great, even for the aluminum version. The one con I initially had with this tripod is the ball head accepts only square arca brackets, not allowing for L-bracket access. I have since switched from a Sony A7R2 to a A7C2 and with the reduction in weight, portrait layout maintains sturdiness with flipping the ball head 90 degrees. Neewer does include a ball head adapter for any ball head of your liking, but I do like this one as I have gotten used to it. I also purchased 2 small rig 1/4” thread adapters and mounted it with a neewer phone/device mount that I have my travel charger connecting power to my body for longer Astro shoots (see photo). Anyway, great form factor and lightweight but maintains good stability. Perfect addition to my bag.

05/31/2024

alain jolicoeur

J ai plusieurs type de trépieds et celui la est de très bonne qualité et moins cher que d autre je le recommande à tous les photographes

05/13/2024

Tayloray

I had a cheaper tripod like this for a few years that was faux carbon fiber. And it held up pretty well but eventually the center broke out of it. I’m pretty hard on equipment working in a shop filming myself I get things oily. Metal dust. Sparks. Falling over Etc. so I decided to buy a monfrotto to have a nice heavy duty tripod. and while it’s a nice piece. And very well built. After a couple of years the center height adjustment broke. So I had to glue it all the way down. And that’s a feature I need often so I decided to shop for a new tripod. I was conflicted on going back to a light weight one. Or another heavy one. But man I’m glad I went this route. I’ve only had this thing for a day but it’s a night and day difference carrying it around the shop vs the manfrotto. But while it’s superLight, it doesn’t feel cheap or chinsy. It feels very sturdy and tight. I also really like the quick release as it allows you to snap it in from any direction vs only fitting one way. So while I can’t attest to the longevity of it yet. It’s a very nice. Well made tripod. The fit and finish of the hardware is very good.