Don't give up - check the spelling or try less specific search terms.
Q1: How many lights could be connected at once?
The APP could control up to 8 lights at the same time.
Q2: How long will it take to fully charge the RGB150 LED Light?
Usually, it will take about 2.5 hours to be fully charged if it's charged by a 5V 2A charger.
Q3: How far is the RGB150 LED Light good for?
Two meters at the most.
Q4: Could the RGB168 APP LED work with a remote?
Unfortunately, it only works with APP.
Q5: Can I purchase an adapter to have the RGB168 APP LED mount on standard screw mounts?
An adapter with 1/4" - 20 standard mounting screws will work with it, same as the bottom of DSLR cameras, etc.
Q6: How long could the battery of the RGB1 LED light last?
The built-in 6400mAh battery makes this RGB1 photography lighting portable for outdoor shooting and offers 90min of run-time at 100% brightness. The light features a USB Type-C port that can receive power from wall chargers, portable chargers, and car chargers through the included charging cable.
Q7: How to connect Neewer SL90 LED light with my phone successfully? My phone can't find the light with the app.
Please check if SL90 LED shows up in the Bluetooth available devices on the phone's BT menu, at the same time, reset the Bluetooth on the light, reboot the app and disconnect other devices. If it still doesn't work, please try to reboot the phone after "forgetting" a few other devices.
Q8: Do you have a recommendation for a microphone that would work well with RGB-A111 video rig light and an iPhone?
Any microphone, as long as it has a code shoe mount will work with the RGB-A111 video rig light, such as the Neewer CM14 microphone.
Q1: Does bi-color 660 LED come with batteries?
Sorry, it doesn't come with batteries, but the batteries could be purchased alone, they are NP-F series batteries, such as Neewer NP-F970 and NP-F550.
Q2: Is 660 LED portable?
Yes, the light comes with A/C power cords, but will also run on two NP-F550 and NP-F970 batteries, so it's portable.
Q3: How bright are the 660 LED? will they light up a small room?
Yes. They are VERY bright. If you want even lighting in a room you’ll want some diffusion as it can be a bit harsh but yes they are very bright!
Q4: Can I use 660 LED for outdoor/sunset shootings?
They do not have enough output for outdoor shooting other than if you are close to the subject and want to add eye sparkle or some face fill.
Q5: Why does the 2-Pack Dimmable 5600K USB LED Video Light to stay off even if you turn the switch on for the outlet?
If you want to use them on an outlet with a switch, they will stay off even if you turn the switch on for the outlet. You will need to manually turn them on from the controller on the plug every time.
Q6: How far is the Neewer 192 LITHIUM BATTERY LED LIGHT good for?
It is not a spotlight, and the rating is 650 lux. So it will depend on the ambient light. 15 feet, ok, in complete darkness. Indoors, with daylight, it would not count on more than 5 feet.
Q7: How many meters does the bi-color CL124 handheld LED light can be irradiated at most? For video shooting
The maximum illumination for the light is 0.5M/1500LUX and 1M/600LUX. For video shooting, it is recommended to use the light within 5 meters.
Q1: The soft tube is too stiff, and can not be bent.
The soft tube (or gooseneck) is meant to be flexible, but still maintain position, and is not entirely soft as the name might suggest. It is used to allow the light to bend slightly in different directions and hold the desired position. Initially, the soft tube may be stiff and require some effort to bend, but will loosen some as you use it. The best way to bend the soft tube is by grabbing the light panel it is connected to and not grabbing the tube directly as can be seen here in the instructional video.
Q2: The light can not be installed on the stand securely.
In order to secure the light on the stand properly, the black cap that may have come with the stand needs to be removed. This will allow the light to be mounted completely onto the stand. Once it is mounted completely, tighten the side knob until the light is snug on the stand. You can also see setup instructions here.
Q1: Does this CB60 light have a variable color temperature?
No, it's 5600k color balance. You can change the brightness intensity, however.
Q2: Can you control multiple lights with a single remote?
Yes, you set each light to a separate channel and change the channel on the single remote to control each light.
Q1: How to check the version of the Vision 5?
Press and hold on [AUDIO] button, meanwhile, switch on the power of VISION5 flash. You can check the new version number of the flash light on the top right of the LCD screen.
Q2: How to check the version of the VC818TX transmitter